Search results: Found 9

Listing 1 - 9 of 9
Sort by
Quantitative phase-field model for phase transformations in multi-component alloys

Author:
Book Series: Schriftenreihe des Instituts für Angewandte Materialien, Karlsruher Institut für Technologie ISSN: 21929963 ISBN: 9783731500209 Year: Volume: 21 Pages: 263 p. DOI: 10.5445/KSP/1000034598 Language: ENGLISH
Publisher: KIT Scientific Publishing
Subject: Physics (General)
Added to DOAB on : 2019-07-30 20:01:59
License:

Loading...
Export citation

Choose an application

Abstract

Phase-field modeling has spread to a variety of applications involving phase transformations.While the method has wide applicability, derivation of quantitative predictions requires deeper understanding of the coupling between the system and model parameters. The book highlights a novel phase-field model based on a grand-potential formalism allowing for an elegant and efficient solution to problems in phase transformations.

Finite element simulation of dislocation based plasticity and diffusion in multiphase materials at high temperature

Author:
Book Series: Schriftenreihe Kontinuumsmechanik im Maschinenbau / Karlsruher Institut für Technologie, Institut für Technische Mechanik - Bereich Kontinuumsmechanik ISSN: 2192693X ISBN: 9783731509189 Year: Volume: 14 Pages: X, 197 p. DOI: 10.5445/KSP/1000092297 Language: ENGLISH
Publisher: KIT Scientific Publishing
Subject: Technology (General)
Added to DOAB on : 2019-07-30 20:02:01
License:

Loading...
Export citation

Choose an application

Abstract

A single-crystal plasticity model as well as a gradient crystal plasticity model are used to describe the creep behavior of directionally solidi?ed NiAl based eutectic alloys. To consider the transition from theoretical to bulk strength, a hardening model was introduced to describe the strength of the reinforcing phases. Moreover, to account for microstructural changes due to material ?ux, a coupled diffusional-mechanical simulation model was introduced.

Ultrasonic Cavitation Treatment of Metallic Alloys

Authors: ---
ISBN: 9783039281961 9783039281978 Year: Pages: 110 DOI: 10.3390/books978-3-03928-197-8 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General) --- General and Civil Engineering
Added to DOAB on : 2020-04-07 23:07:08
License:

Loading...
Export citation

Choose an application

Abstract

This Special Issue scrutinizes the use of ultrasonic-cavitation melt treatment in technology of high-quality metallic alloys with improved mechanical properties, and assesses the driving mechanisms of cavitation-induced effects, such as grain refinement, degassing, wetting, and particle distribution. In this context, the research published in this Special Issue considers the interaction between the cavitation field and acoustic streaming with the melt flow and the suspended solid/liquid phases, the characterization and mapping of cavitation activity in a melt volume, and the possibility of achieving high efficiency in processing large melt volumes through technological approaches for the commercial implementation of ultrasonic processing technology.

Continuous Casting

Author:
ISBN: 9783039213214 9783039213221 Year: Pages: 250 DOI: 10.3390/books978-3-03921-322-1 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General) --- Chemical Engineering
Added to DOAB on : 2019-08-28 11:21:27
License:

Loading...
Export citation

Choose an application

Abstract

Continuous casting is an industrial process whereby molten metal is solidified into a semi-finished billet, bloom, or slab for subsequent rolling in finishing mills; it is the most frequently used process to cast not only steel, but also aluminium and copper alloys. Since its widespread introduction for steel in the 1950s, it has evolved to achieve improved yield, quality, productivity and cost efficiency. It allows lower-cost production of metal sections with better quality, due to the inherently lower costs of continuous, standardized production of a product, as well as providing increased control over the process through automation. Nevertheless, challenges remain and new ones appear, as ways are sought to minimize casting defects and to cast alloys that could originally only be cast via other means. This Special Issue of the journal ""Metals"" consists of 14 research articles that cover many aspects of experimental work and theoretical modelling related to the ongoing development of continuous casting processes.

Keywords

slab continuous casting --- hybrid simulation model --- uneven secondary cooling --- numerical simulation --- molten steel flow --- solidification --- inclusion motion --- inclusion entrapment --- billet continuous casting --- swirling flow tundish --- multiphase flow --- heat transfer --- mold --- continuous casting --- numerical simulation --- round bloom --- continuous casting --- final electromagnetic stirring --- electromagnetic field --- polycrystalline model --- pores --- inclusions --- mechanism --- beam blank --- crystal --- propagation --- asymptotic analysis --- numerical simulation --- continuous casting --- air mist spray cooling --- continuous casting --- heat flux --- HTC --- secondary cooling --- thin-slab cast direct-rolling --- austenite grain coarsening --- grain growth control --- liquid core reduction --- secondary cooling --- two-phase pinning --- annular argon blowing --- upper nozzle --- flow behavior --- argon gas distribution --- tundish --- continuous casting --- bulge deformation --- thermomechanical coupling --- segmented roller --- finite element analysis --- steel tundish --- baffle --- flow field --- velocity --- PIV --- multi-source information fusion --- data stream --- continuous casting --- roll gap value --- prediction --- global optimization --- support vector regression --- variational mode decomposition --- empirical mode decomposition --- support vector regression --- mold level --- continuous casting --- magnetohydrodynamics --- fluid flow --- bubbles --- inclusions --- entrapment --- entrainment --- heat transfer --- solidification --- slab mold --- continuous casting --- n/a

Crystal Chemistry of Zinc, Cadmium and Mercury

Author:
ISBN: 9783038976523 Year: Pages: 156 DOI: 10.3390/books978-3-03897-653-0 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Organic Chemistry --- Chemistry (General) --- Science (General)
Added to DOAB on : 2019-04-05 10:34:31
License:

Loading...
Export citation

Choose an application

Abstract

This book is a printed edition of the Special Issue Crystal Chemistry of Zinc, Cadmium and Mercury that was published in Crystals

Removal of Organic Pollution in Water Environment

Authors: ---
ISBN: 9783039218400 9783039218417 Year: Pages: 154 DOI: 10.3390/books978-3-03921-841-7 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Science (General) --- Chemistry (General)
Added to DOAB on : 2019-12-09 11:49:16
License:

Loading...
Export citation

Choose an application

Abstract

The development of civilization entails a growing demand for consumer goods. A side effect of the production and use of these materials is the production of solid waste and wastewater. Municipal and industrial wastewater usually contains a large amount of various organic compounds and is the main source of pollution of the aquatic environment. Therefore, the search for effective methods of wastewater and other polluted water treatment is an important element of caring for the natural environment. This book presents research on the determination and removal of environmentally hazardous organic compounds from aqueous samples. The articles included in this book describe the results of examinations, at the laboratory scale, of the efficiency of chemical as well as physical processes for the removal or degradation of selected model pollutants. Environmental studies, especially those concerning the determination of trace impurities, require effective isolation and concentration procedures. The methods used for this purpose should meet the requirements of green chemistry. The liquid phase microextraction procedures and use of electrochemical methods described in this book seem to be proper for environmental studies, as they are effective and environmentally friendly.

Structure and Mechanical Properties of Transition Group Metals, Alloys, and Intermetallic Compounds

Author:
ISBN: 9783039211463 9783039211470 Year: Pages: 222 DOI: 10.3390/books978-3-03921-147-0 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General) --- General and Civil Engineering --- Materials
Added to DOAB on : 2019-08-28 11:21:27
License:

Loading...
Export citation

Choose an application

Abstract

The aim of this Special Issue is to present the latest theoretical and experimental achievements concerning the mechanisms of microstructural change in metallic materials subject to different processing methods, and their effect on mechanical properties. It is my pleasure to present a series of compelling scientific papers written by scientists from the community of transition group metals, alloys, and intermetallic compounds.

Keywords

metal matrix composites --- laser metal deposition --- Inconel 625 --- additive manufacturing --- laser processing --- metal matrix composites --- Z-pin reinforcement --- delamination --- carbon fiber --- strengthening mechanisms --- severe plastic deformation (SPD) --- cross-channel extrusion (CCE) --- back pressure (BP) --- numerical simulation (FEM) --- physical modeling technique (PMT) --- metal–matrix composites (MMCs) --- carbon fiber --- mechanical properties --- z-pin reinforcement --- laminate --- titanium alloys --- high pressure torsion --- microhardness --- Cu–Ag alloy --- high-pressure torsion --- ultrafine microstructure --- phase dissolution --- microhardness --- friction stir welding --- heat treatment --- AA2519 --- microstructure --- fatigue --- fractography --- AZ91 --- magnesium alloys --- creep --- high pressure die casting --- additive manufacturing --- Ti-6Al-4V --- LENS --- mechanical characterization --- twin roll casting --- magnesium alloy --- calcium --- Mg-Zn-Al-Ca alloy --- texture --- flow curve --- processing map --- honeycomb structure --- additive manufacturing --- laser engineered net shaping --- LENS --- Ti6Al4V alloy --- energy absorption --- dynamic tests --- solidification thermal parameters --- Cu-Al-Ni-Fe bronze alloys --- hardness --- microhardness --- specific intermetallics --- MAX phase --- Ti3SiC2 --- composite --- high energy ball milling --- spark plasma sintering --- structure --- mechanical properties --- deformation behavior --- tribaloy-type alloy --- CoCrMoSi alloy coatings --- T-800 alloy --- Laves phase --- Laser Engineered Net Shaping (LENSTM) --- electron microscopy (in situ SEM) --- delamination --- metal matrix composites (MMCs) --- z-pinning

Additive Manufacturing: Alloy Design and Process Innovations

Authors: ---
ISBN: 9783039283521 / 9783039283538 Year: Pages: 372 DOI: 10.3390/books978-3-03928-353-8 Language: eng
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General) --- General and Civil Engineering
Added to DOAB on : 2020-06-09 16:38:57
License:

Loading...
Export citation

Choose an application

Abstract

Additive manufacturing (AM) is one of the manufacturing processes that warrants the attention of industrialists, researchers and scientists, because of its ability to produce materials with a complex shape without theoretical restrictions and with added functionalities. There are several advantages to employing additive manufacturing as the primary additive manufacturing process. However, there exist several challenges that need to be addressed systematically. A couple such issues are alloy design and process development. Traditionally alloys designed for conventional cast/powder metallurgical processes were fabricated using advanced AM processes. This is the wrong approach considering that the alloys should be coined based on the process characteristics and meta-stable nature of the process. Hence, we must focus on alloy design and development for AM that suits the AM processes. The AM processes, however, improve almost every day, either in terms of processing capabilities or processing conditions. Hence, the processing part warrants a section that is devoted to these advancements and innovations. Accordingly, the present Special Issue (book) focuses on two aspects of alloy development and process innovations. Here, 45 articles are presented covering different AM processes including selective laser melting, electron beam melting, laser cladding, direct metal laser sintering, ultrasonic consolidation, wire arc additive manufacturing, and hybrid manufacturing. I believe that this Special Issue bears is vital to the field of AM and will be a valuable addition.

Keywords

concrete --- slag --- valorization --- cement --- circular economy --- wire feeding additive manufacturing --- wire lateral feeding --- macro defects --- side spatters --- selective laser melting --- numerical analysis --- thermal behaviour --- AlSi10Mg alloy --- design --- disc brake --- 3D metal printing --- direct metal laser sintering --- thermal stress analysis --- radial grooves --- nickel alloys --- Hastelloy X alloy --- additive manufacturing --- microstructure --- scanning electron microscopy (SEM) --- laser powder bed fusion (LPBF) --- selective laser melting --- titanium alloy --- heat treatment --- microstructure --- microhardness measurement --- arc additive manufacturing --- Al–5Si alloy --- pulse frequency --- arc current --- microstructure --- porosity --- 2219 aluminum alloy --- constitutive model --- microstructural evolution --- continuous dynamic recrystallization --- hot deformation --- selective laser melting --- amorphous alloy --- finite element analysis --- residual stress --- 2219 aluminum alloy --- intermediate thermo-mechanical treatment --- storage energy --- CuAl2 phase --- grain refinement --- selective laser melting --- GH4169 --- temperature and stress fields --- simulation --- model --- selective laser melting --- divisional scanning --- residual stress --- deformation --- thermal conductivity --- tensile strength --- inoculation --- gray cast iron --- additive manufacturing --- selective laser melting --- AlSi10Mg --- Al6061 --- SLM process parameters --- performance characteristics --- AlSi10Mg --- multi-laser manufacturing --- selective laser melting --- microstructure --- mechanical property --- additive manufacturing --- metal powders --- powder flowability --- powder properties --- aluminum --- water absorption --- laser cladding deposition --- 12CrNi2 alloy steel powder --- substrate preheating --- microstructure and properties --- residual stress --- ultrafast laser --- femtosecond --- ablation --- scanning --- additive surface structuring --- hydrophobicity --- parts design --- additive manufacturing --- fused filament fabrication --- fatigue --- Taguchi --- ABS --- additive manufacturing --- selective laser melting --- AlSi10Mg --- Al6061 --- SLM process parameters --- quality of the as-built parts --- aluminum alloys --- selective laser melting (SLM) --- mechanical properties --- selective laser melting --- H13 tool steel --- process parameters --- scanning strategy --- support strategy --- porosity reduction --- selective laser melting --- Ti6Al4V alloy --- martensitic transformation --- texture evolution --- mechanical properties --- M300 mold steel --- elastic abrasive --- PSO-BP neural network algorithm --- parameter optimization --- WxNbMoTa --- refractory high-entropy alloy --- laser cladding deposition --- rapid solidification --- bulk metallic glasses --- selective laser melting --- Cu50Zr43Al7 --- mechanical properties --- Ti-6Al-4V --- wear --- additive manufacturing --- properties --- in-process temperature in MPBAM --- analytical modeling --- high computational efficiency --- molten pool evolution --- laser power absorption --- latent heat --- scanning strategy --- powder packing --- graphene nano-sheets (GNSs) --- epoxy solder --- intermetallic compound (IMC) --- laser powder bed fusion --- additive manufacturing --- aluminum --- composition --- mechanical properties --- localized inductive heating --- hot stamping steel blanks --- tailored properties --- magnetizer --- selective laser melting --- AlSi10Mg alloy --- dynamic properties --- impact --- crystallographic texture --- Additive manufacturing --- selective laser melting --- volumetric heat source --- thermal capillary effects --- melt pool size --- selective laser melting --- Inconel 718 --- crystallographic texture --- subgranular dendrites --- epitaxial growth --- 3D printing --- continuous carbon fiber --- thermosetting epoxy resin --- mechanical properties --- Powder bed --- fatigue --- Hot Isostatic Pressure --- Electron Beam Melting --- stability lobe diagram --- milling --- process-damping --- dynamic characteristics --- thin-walled weak rigidity parts --- Al–Si --- selective laser melting (SLM) --- microstructure --- mechanical properties --- selective laser melting --- microstructure --- defects --- Inconel 718 --- laser energy density --- selective laser melting --- molten pool dynamic behavior --- equivalent processing model --- workpiece scale --- nickel-based superalloy --- numerical simulation --- metallic glasses --- composite materials --- interfaces --- additive manufacturing --- ultrasonic bonding --- 3D printing --- Al–Mg–Si alloy --- quenching rate --- microstructures --- mechanical properties --- paint bake-hardening --- precipitates --- additive manufacturing --- powder bed fusion --- selective laser melting --- regular mixing --- ball milling --- flowability --- Ti-6Al-4V --- microstructure --- element segregation --- laves phase --- vanadium --- laser cladding --- arc additive manufacture --- Al–Mg alloy --- Mg content --- microstructure --- mechanical properties --- n/a

Additive Manufacturing: Alloy Design and Process Innovations

Authors: ---
ISBN: 9783039284146 / 9783039284153 Year: Pages: 352 DOI: 10.3390/books978-3-03928-415-3 Language: eng
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General) --- General and Civil Engineering
Added to DOAB on : 2020-06-09 16:38:57
License:

Loading...
Export citation

Choose an application

Abstract

Additive manufacturing (AM) is one of the manufacturing processes that warrants the attention of industrialists, researchers and scientists, because of its ability to produce materials with a complex shape without theoretical restrictions and with added functionalities. There are several advantages to employing additive manufacturing as the primary additive manufacturing process. However, there exist several challenges that need to be addressed systematically. A couple such issues are alloy design and process development. Traditionally alloys designed for conventional cast/powder metallurgical processes were fabricated using advanced AM processes. This is the wrong approach considering that the alloys should be coined based on the process characteristics and meta-stable nature of the process. Hence, we must focus on alloy design and development for AM that suits the AM processes. The AM processes, however, improve almost every day, either in terms of processing capabilities or processing conditions. Hence, the processing part warrants a section that is devoted to these advancements and innovations. Accordingly, the present Special Issue (book) focuses on two aspects of alloy development and process innovations. Here, 45 articles are presented covering different AM processes including selective laser melting, electron beam melting, laser cladding, direct metal laser sintering, ultrasonic consolidation, wire arc additive manufacturing, and hybrid manufacturing. I believe that this Special Issue bears is vital to the field of AM and will be a valuable addition.

Keywords

concrete --- slag --- valorization --- cement --- circular economy --- wire feeding additive manufacturing --- wire lateral feeding --- macro defects --- side spatters --- selective laser melting --- numerical analysis --- thermal behaviour --- AlSi10Mg alloy --- design --- disc brake --- 3D metal printing --- direct metal laser sintering --- thermal stress analysis --- radial grooves --- nickel alloys --- Hastelloy X alloy --- additive manufacturing --- microstructure --- scanning electron microscopy (SEM) --- laser powder bed fusion (LPBF) --- selective laser melting --- titanium alloy --- heat treatment --- microstructure --- microhardness measurement --- arc additive manufacturing --- Al–5Si alloy --- pulse frequency --- arc current --- microstructure --- porosity --- 2219 aluminum alloy --- constitutive model --- microstructural evolution --- continuous dynamic recrystallization --- hot deformation --- selective laser melting --- amorphous alloy --- finite element analysis --- residual stress --- 2219 aluminum alloy --- intermediate thermo-mechanical treatment --- storage energy --- CuAl2 phase --- grain refinement --- selective laser melting --- GH4169 --- temperature and stress fields --- simulation --- model --- selective laser melting --- divisional scanning --- residual stress --- deformation --- thermal conductivity --- tensile strength --- inoculation --- gray cast iron --- additive manufacturing --- selective laser melting --- AlSi10Mg --- Al6061 --- SLM process parameters --- performance characteristics --- AlSi10Mg --- multi-laser manufacturing --- selective laser melting --- microstructure --- mechanical property --- additive manufacturing --- metal powders --- powder flowability --- powder properties --- aluminum --- water absorption --- laser cladding deposition --- 12CrNi2 alloy steel powder --- substrate preheating --- microstructure and properties --- residual stress --- ultrafast laser --- femtosecond --- ablation --- scanning --- additive surface structuring --- hydrophobicity --- parts design --- additive manufacturing --- fused filament fabrication --- fatigue --- Taguchi --- ABS --- additive manufacturing --- selective laser melting --- AlSi10Mg --- Al6061 --- SLM process parameters --- quality of the as-built parts --- aluminum alloys --- selective laser melting (SLM) --- mechanical properties --- selective laser melting --- H13 tool steel --- process parameters --- scanning strategy --- support strategy --- porosity reduction --- selective laser melting --- Ti6Al4V alloy --- martensitic transformation --- texture evolution --- mechanical properties --- M300 mold steel --- elastic abrasive --- PSO-BP neural network algorithm --- parameter optimization --- WxNbMoTa --- refractory high-entropy alloy --- laser cladding deposition --- rapid solidification --- bulk metallic glasses --- selective laser melting --- Cu50Zr43Al7 --- mechanical properties --- Ti-6Al-4V --- wear --- additive manufacturing --- properties --- in-process temperature in MPBAM --- analytical modeling --- high computational efficiency --- molten pool evolution --- laser power absorption --- latent heat --- scanning strategy --- powder packing --- graphene nano-sheets (GNSs) --- epoxy solder --- intermetallic compound (IMC) --- laser powder bed fusion --- additive manufacturing --- aluminum --- composition --- mechanical properties --- localized inductive heating --- hot stamping steel blanks --- tailored properties --- magnetizer --- selective laser melting --- AlSi10Mg alloy --- dynamic properties --- impact --- crystallographic texture --- Additive manufacturing --- selective laser melting --- volumetric heat source --- thermal capillary effects --- melt pool size --- selective laser melting --- Inconel 718 --- crystallographic texture --- subgranular dendrites --- epitaxial growth --- 3D printing --- continuous carbon fiber --- thermosetting epoxy resin --- mechanical properties --- Powder bed --- fatigue --- Hot Isostatic Pressure --- Electron Beam Melting --- stability lobe diagram --- milling --- process-damping --- dynamic characteristics --- thin-walled weak rigidity parts --- Al–Si --- selective laser melting (SLM) --- microstructure --- mechanical properties --- selective laser melting --- microstructure --- defects --- Inconel 718 --- laser energy density --- selective laser melting --- molten pool dynamic behavior --- equivalent processing model --- workpiece scale --- nickel-based superalloy --- numerical simulation --- metallic glasses --- composite materials --- interfaces --- additive manufacturing --- ultrasonic bonding --- 3D printing --- Al–Mg–Si alloy --- quenching rate --- microstructures --- mechanical properties --- paint bake-hardening --- precipitates --- additive manufacturing --- powder bed fusion --- selective laser melting --- regular mixing --- ball milling --- flowability --- Ti-6Al-4V --- microstructure --- element segregation --- laves phase --- vanadium --- laser cladding --- arc additive manufacture --- Al–Mg alloy --- Mg content --- microstructure --- mechanical properties --- n/a

Listing 1 - 9 of 9
Sort by
Narrow your search