Search results: Found 2

Listing 1 - 2 of 2
Sort by
Machining—Recent Advances, Applications and Challenges

Authors: ---
ISBN: 9783039213771 9783039213788 Year: Pages: 554 DOI: 10.3390/books978-3-03921-378-8 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General) --- General and Civil Engineering
Added to DOAB on : 2019-12-09 16:10:12
License:

Loading...
Export citation

Choose an application

Abstract

The Special Issue Machining—Recent Advances, Applications and Challenges is intended as a humble collection of some of the hottest topics in machining. The manufacturing industry is a varying and challenging environment where new advances emerge from one day to another. In recent years, new manufacturing procedures have retained increasing attention from the industrial and scientific community. However, machining still remains the key operation to achieve high productivity and precision for high-added value parts. Continuous research is performed, and new ideas are constantly considered. This Special Issue summarizes selected high-quality papers which were submitted, peer-reviewed, and recommended by experts. It covers some (but not only) of the following topics: High performance operations for difficult-to-cut alloys, wrought and cast materials, light alloys, ceramics, etc.; Cutting tools, grades, substrates and coatings. Wear damage; Advanced cooling in machining: Minimum quantity of lubricant, dry or cryogenics; Modelling, focused on the reduction of risks, the process outcome, and to maintain surface integrity; Vibration problems in machines: Active and passive/predictive methods, sources, diagnosis and avoidance; Influence of machining in new concepts of machine–tool, and machine static and dynamic behaviors; Machinability of new composites, brittle and emerging materials; Assisted machining processes by high-pressure, laser, US, and others; Introduction of new analytics and decision making into machining programming. We wish to thank the reviewers and staff from Materials for their comments, advice, suggestions and invaluable support during the development of this Special Issue.

Keywords

dry-cutting --- concrete --- segmented diamond blade --- topography --- diameter variation --- weight loss --- in situ estimation --- SACE-drilled hole depth --- spark-assisted chemical engraving --- glass machining --- computer vision --- electrochemical discharge machining --- butt weld joint --- fatigue --- crack growth rate --- weld reinforcement --- cooling rate --- artificial neutral network --- cutting parameters --- magnesium alloys --- optimization --- prime machining costs --- surface roughness --- electropulsing --- machinability --- chip compression ratio --- current density --- specific cutting energy --- cutting edge microgeometry --- residual stress --- finite element model --- cutting edge preparation --- Inconel 718 --- stiffness properties --- parameter identification --- connections --- machine tool --- response surface methodology --- design of experiments --- modal testing --- plastic zone --- fracture mechanism --- steel sheet --- cutting process --- Huber–Mises stress --- finite element method --- microscopic analysis --- PVD Ti0.41Al0.59N/Ti0.55Al0.45N coating --- cutting temperature --- Inconel 718 --- cutting tool wear --- secondary adhesion wear --- turning --- machining --- aluminium --- flank super abrasive machining (SAM) --- flank milling --- Inconel® 718 --- roughness --- residual stress --- machine vision --- on-machine monitoring --- tool insert condition --- computer numerical control --- turning machine tools --- multi-beam laser --- heat transfer analysis --- fast simulation --- GPU --- analytic solution --- minimum quantity lubrication --- surface grinding --- multi-objective optimization --- grey relational analysis --- surface topography --- sustainable machining --- Gamma-TiAl --- superalloys --- slight materials --- drilling --- titanium aluminides --- additive manufacturing --- single point incremental sheet forming --- residual stresses --- X-ray diffraction --- ultra-precision machining --- slow tool servo --- surface topography --- simulation --- microlens array --- sinusoidal grid --- Milling stability --- variable pitch --- chatter --- self-excitation --- milling --- ceramics --- ductile machining --- PCD --- corner radius --- material removal rate --- adhesive --- machining --- modelling --- dry --- CFRP/UNS A92024 --- induction assisted milling --- tool wear --- taguchi method --- cutting tool --- machining temperatures at two deformation zones --- force–temperature correlation through analytical modeling --- high computational efficiency --- real-time prediction --- hybrid stacks drilling --- minimum quantity lubrication --- hole quality --- tool wear --- WEDM --- EN 31 steel --- surface roughness --- fractal dimension --- ANN --- GA --- cryogenic machining --- cutting tool --- cutting geometry --- titanium --- power consumption --- material-removal rate --- specific energy consumption --- grain density --- modeling --- shape memory alloy --- superelastic nitinol --- WEDM --- heat transfer search algorithm --- DSC test --- shape memory effect --- dish angle --- trochoidal step --- response surface methodology --- surface roughness --- desirability approach --- tool wear --- trochoidal milling --- titanium alloy --- chip morphology --- thin-wall machining --- chatter --- vibration --- deflection --- damping --- prediction --- workholding --- fixture --- dynamic --- stability --- titanium alloys --- machining --- turning --- machinability --- tool wear --- laser-assisted machining --- Taguchi method --- optimal machining conditions --- machining characteristic --- milling --- the cutting force components --- vibrations --- magnesium alloys --- artificial neural networks

Wood Properties and Processing

Author:
ISBN: 9783039288212 / 9783039288229 Year: Pages: 350 DOI: 10.3390/books978-3-03928-822-9 Language: eng
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Science (General) --- Physics (General)
Added to DOAB on : 2020-06-09 16:38:57
License:

Loading...
Export citation

Choose an application

Abstract

Wood-based materials are CO2-neutral, renewable, and considered to be environmentally friendly. The huge variety of wood species and wood-based composites allows a wide scope of creative and esthetic alternatives to materials with higher environmental impacts during production, use and disposal. Quality of wood is influenced by the genetic and environmental factors. One of the emerging uses of wood are building and construction applications. Modern building and construction practices would not be possible without use of wood or wood-based composites. The use of composites enables using wood of lower quality for the production of materials with engineered properties for specific target applications. Even more, the utilization of such reinforcing particles as carbon nanotubes and nanocellulose enables development of a new generation of composites with even better properties. The positive aspect of decomposability of waste wood can turn into the opposite when wood or wood-based materials are exposed to weathering, moisture oscillations, different discolorations, and degrading organisms. Protective measures are therefore unavoidable for many outdoor applications. Resistance of wood against different aging factors is always a combined effect of toxic or inhibiting ingredients on the one hand, and of structural, anatomical, or chemical ways of excluding moisture on the other.

Keywords

artificial weathering --- blue staining fungi --- colour change --- natural weathering --- wood --- marketing --- material preference --- urban housing --- immigrants --- building culture background --- building material --- chemical changes --- colour changes --- infrared spectroscopy --- hardwoods --- roughness --- Douglas-fir --- lumber --- non-destructive testing --- modulus of elasticity (MOE) --- stiffness --- thinning --- silviculture --- wood based composites --- hybrid beams --- bending stiffness --- flexural rigidity --- aluminium reinforcements --- wooden windows --- end-product-based fiber attribute determinates --- longitudinal stress wave velocity --- mixed-effects hierarchical linear models --- predictive performance --- bamboo grid packing --- cooling packing --- cooling tower --- mechanical properties --- fungi --- bamboo --- heat treatment --- wood --- structural changes --- nondestructive testing --- ultrasound --- Euler-Bernoulli --- modulus of elasticity --- neural network --- high frequency drying --- moisture content --- wood --- brittleness --- density --- dynamic strength --- High-Energy Multiple Impact (HEMI)–test --- Resistance to Impact Milling (RIM) --- bamboo grid packing --- cooling packing --- cooling tower --- chemical composition --- elemental composition --- FTIR --- color --- tropical woods --- brown rot --- Coniophora puteana --- colour --- CIEL*a*b* system --- technological and product innovations --- cyclic loading --- laminated wood --- deflection at the limit of proportionality --- deflection at the modulus of rupture --- wood-processing industry performance --- orthotropic --- elastic constants --- green larch --- compression --- three-point bending --- coefficient of wood bendability --- laminated wood --- technological and product innovations --- minimal curve radius --- orthotropic --- tensile modulus --- tensile strength --- moisture content --- relative humidity --- glued lamella --- flexible chair --- weight of a user --- ultimate state --- volume yield --- European hardwoods --- low quality round wood --- strength grading --- glulam --- ultrasonic wave velocity measurement --- nondestructive assessment --- wood mechanical properties --- intra-ring variation --- dynamic modulus of elasticity --- Pinus massoniana Lamb. --- phenol formaldehyde resin --- wood impregnation --- wood properties --- cell-wall mechanics --- ultrasonic speed --- poplar seedlings --- acoustic resonance --- density --- microfibril angle --- root-collar diameter --- machinability --- Eucalyptus --- plantation timber --- fiber-managed hardwoods

Listing 1 - 2 of 2
Sort by
Narrow your search

Publisher

MDPI - Multidisciplinary Digital Publishing Institute (2)


License

CC by-nc-nd (2)


Language

eng (1)

english (1)


Year
From To Submit

2020 (1)

2019 (1)