Search results: Found 4

Listing 1 - 4 of 4
Sort by
Biofuels and Biochemicals Production

Author:
ISBN: 9783038425540 9783038425557 Year: Pages: 196 DOI: 10.3390/books978-3-03842-555-7 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Biology
Added to DOAB on : 2018-01-10 12:39:10
License:

Loading...
Export citation

Choose an application

Abstract

The high demand and depletion of petroleum reserves and the associated impact on the environment, together with volatility in the energy market price over the past three decades, have led to tremendous efforts in bio-based research activities, especially in biofuels and biochemicals. Most people associate petroleum with gasoline, however, approximately 6000 petroleum-derived products are available on the market today. Ironically, these petroleum-derived products have not elicited a high level of interest among the populace and media due, in part, to little awareness of the origins of these important products. Given the finite nature of petroleum, it is critical to devote substantial amounts of energy and resources on the development of renewable chemicals, as is currently done for fuels. Theoretically, the bioproduction of gasoline-like fuels and the 6000 petroleum-derived products are within the realm of possibility since our aquatic and terrestrial ecosystems contain abundant and diverse microorganisms capable of catalyzing unlimited numbers of reactions. Moreover, the fields of synthetic biology and metabolic engineering have evolved to the point that a wide range of microorganisms can be enticed or manipulated to catalyze foreign, or improve indigenous, biosynthetic reactions. To increase the concentration of products of interest and to ensure consistent productivity and yield, compatible fermentation processes must be used. Greater agricultural and chemical production during the past three decades, due in part to population increase and industrialization, has generated increasing levels of waste, which must be treated prior to discharge into waterways or wastewater treatment plants. Thus, in addition to the need to understand the physiology and metabolism of microbial catalysts of biotechnological significance, development of cost-effective fermentation strategies to produce biofuels and chemicals of interests while generating minimal waste, or better yet, converting waste into value-added products, is crucial. In this Special Issue, we invite authors to submit original research and review articles that increase our understanding of fermentation technology vis-à-vis production of liquid biofuels and biochemicals, and fermentation strategies that alleviate product toxicity to the fermenting microorganism while enhancing productivity. Further, original research articles and reviews focused on anaerobic digestion, production of gaseous biofuels, fermentation optimization using modelling and simulations, metabolic engineering, or development of tailor-made fermentation processes are welcome.

Biomass Processing for Biofuels, Bioenergy and Chemicals

Authors: --- ---
ISBN: 9783039289097 / 9783039289103 Year: Pages: 428 DOI: 10.3390/books978-3-03928-910-3 Language: eng
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General) --- General and Civil Engineering
Added to DOAB on : 2020-06-09 16:38:57
License:

Loading...
Export citation

Choose an application

Abstract

Biomass can be used to produce renewable electricity, thermal energy, transportation fuels (biofuels), and high-value functional chemicals. As an energy source, biomass can be used either directly via combustion to produce heat or indirectly after it is converted to one of many forms of bioenergy and biofuel via thermochemical or biochemical pathways. The conversion of biomass can be achieved using various advanced methods, which are broadly classified into thermochemical conversion, biochemical conversion, electrochemical conversion, and so on. Advanced development technologies and processes are able to convert biomass into alternative energy sources in solid (e.g., charcoal, biochar, and RDF), liquid (biodiesel, algae biofuel, bioethanol, and pyrolysis and liquefaction bio-oils), and gaseous (e.g., biogas, syngas, and biohydrogen) forms. Because of the merits of biomass energy for environmental sustainability, biofuel and bioenergy technologies play a crucial role in renewable energy development and the replacement of chemicals by highly functional biomass. This book provides a comprehensive overview and in-depth technical research addressing recent progress in biomass conversion processes. It also covers studies on advanced techniques and methods for bioenergy and biofuel production.

Keywords

lignocellulose --- pretreatment --- hardwood --- extrusion --- enzymatic digestibility --- bioethanol --- renewable energy --- biofuel --- environment --- technology development --- co-combustion --- sewage sludge --- thermogravimetric analysis --- Fourier transform infrared spectroscopy --- synergistic effect --- single-pellet combustion --- biodiesel --- fatty acid methyl ester --- free fatty acids --- oxidation stability --- antioxidant --- hydrogen --- coffee mucilage --- organic wastes --- dark fermentation --- anaerobic digestion --- biodiesel --- bio-jet fuel --- triacylglycerides --- Fatty Acid Methyl Ester --- lipids --- hydrodeoxygenation --- drop-in fuel --- rubber seed oil --- biodiesel production --- nanomagnetic catalyst --- subcritical methanol --- FAME yield --- Box-Behnken design --- GCI --- biodiesel --- diesel --- combustion --- emission --- renewable energy --- microwave --- free fatty acid --- crude oil --- renewable energy --- biomass --- waste --- black soldier fly larvae (BSFL) --- instar --- lipid --- fatty acid methyl ester (FAME) --- fermentation --- Rancimat method --- butylated hydroxyanisole --- tert-butylhydroquinone --- fatty acid methyl esters --- viscosity --- response surface --- anaerobic treatment --- biogas --- kinetic study --- potato peels --- cow manure --- thermophilic --- mesophilic --- palm oil mill effluent --- acclimatization --- direct carbon fuel cell --- biochar --- pyrolysis --- power density --- pre-treatment --- post-treatment --- combustion characteristics --- injection strategies --- compression ratio --- intake temperature --- torrefaction --- vacuum --- biomass pretreatment --- bioenergy --- energy yield --- biochar --- rice straw --- rice husk --- power generation --- gasification --- alternative fuel --- Rhus typhina biodiesel --- non-edible oil --- base-catalyzed transesterification --- Physico-chemical properties --- concentration polarization --- draw solution --- feed solution --- forward osmosis --- pressure-retarded osmosis --- operating conditions --- membrane fouling --- osmotic membrane --- bioenergy --- biofuel --- nanotechnology --- nano-catalysts --- nano-additives --- crude glycerol --- glycerol carbonate --- dimethyl carbonate --- microwave irradiation --- reaction kinetics

Biofuel and Bioenergy Technology

Authors: --- ---
ISBN: 9783038975960 Year: Pages: 425 DOI: 10.3390/books978-3-03897-597-7 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General) --- General and Civil Engineering
Added to DOAB on : 2019-03-21 14:08:22
License:

Loading...
Export citation

Choose an application

Abstract

The subject of this book is ""Biofuel and Bioenergy Technology"". It aims to publish high-quality review and research papers, addressing recent advances in biofuel and bioenergy. State-of-the-art studies of advanced techniques of biorefinery for biofuel production are also included. Research involving experimental studies, recent developments, and novel and emerging technologies in this field are covered. This book contains twenty-seven technical papers which cover diversified biofuel and bioenergy technology-related research that have shown critical results and contributed significant findings to the fields of biomass processing, pyrolysis, bio-oil and its emulsification; transesterification and biodiesel, gasification and syngas, fermentation and biogas/methane, bioethanol and alcohol-based fuels, solid fuel and biochar, and microbial fuel cell and power generation development. The published contents relate to the most important techniques and analyses applied in the biofuel and bioenergy technology.

Keywords

air-steam gasification --- equilibrium model --- tar --- energy exchange --- exergy efficiency --- bio-electro-Fenton microbial fuel cells (Bio-E-Fenton MFCs) --- wastewater --- photo catalyst --- degradation --- calcination --- chemical oxygen demand (COD) --- MFC --- hydrodynamic boundary layer --- recirculation mode --- shear rate --- voltage --- charge transfer resistance --- biodiesel --- direct transesterification --- Rhodotorula glutinis --- single cell oil --- biogas --- tri-reforming process --- syngas --- methane and carbon dioxide conversion --- hydrogen/carbon monoxide ratio --- first-law/second-law efficiency --- biodiesel --- esterification --- liquid lipase --- superabsorbent polymer --- response surface methodology --- waste wood --- torrefaction --- energy yield --- mass yield --- CHO index --- gross calorific value --- Van Krevelen diagram --- anaerobic digestion --- biogas production --- wastewater treatment --- membrane bioreactors --- anaerobic digestion --- methane --- carbon dioxide --- small-scale biogas plants --- developing countries --- SOFC --- validation --- simulation --- exergy --- syngas --- Chlorella --- coal-fired flue-gas --- screening --- biodiesel property --- mixotrophic cultivation --- thermophilic anaerobic digestion --- corn stover --- prairie cord grass --- unbleached paper --- digester performance --- process stability --- synergistic effects --- microbial community --- Methanothermobacter --- biochemical methane potential --- redox potential reduction --- direct interspecies electron transfer --- electroactive biofilm --- Nejayote --- granular activated carbon --- Jerusalem artichoke --- lignocellulose --- acid pretreatment --- nitric acid --- alkali pretreatment --- enzymatic hydrolysis --- ethanol fermentation --- waste biomass --- Vietnam --- solid biofuel --- calorific value --- mechanical durability --- fatty acid methyl ester --- catalyst --- viscosity --- iodine value --- acidity index --- sewage sludge --- pyrolytic oil --- Taguchi method --- thermogravimetric analysis --- synergistic effect --- combined pretreatment --- ball mill --- ethanol organosolv --- herbaceous biomass --- lignin recovery --- Annona muricata --- biodiesel production --- seed oil --- soursop --- two-step process --- response surface methodology --- RSM --- second-generation biodiesel --- stone fruit --- optimisation --- biodiesel testing --- transesterification --- lignocellulosic biomass --- Miscanthus --- mechanical pretreatment --- organosolv pretreatment --- microbial biofuel --- metabolic engineering --- alkanes --- alcohols --- acetone --- electrochemical hydrogenation --- isopropanol --- membrane contamination --- polymer electrolyte membrane --- relative humidity --- diesel --- Carica papaya --- engine performance --- biodiesel --- characterisation --- porosity --- thermophoretic force --- biomass fuel --- non-premixed combustion --- counter-flow structure --- mathematical modeling --- emulsification --- liquefaction --- bio-oils --- co-surfactant --- surfactant --- diesel --- biogas --- Clostridiales --- hydrogen-producing bacteria --- bioreactors --- anaerobic fermentation --- anaerobic digestion --- microbial community composition

Bio-Based Polymers for Engineered Green Materials

Authors: ---
ISBN: 9783039289257 / 9783039289264 Year: Pages: 568 DOI: 10.3390/books978-3-03928-926-4 Language: eng
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General) --- General and Civil Engineering
Added to DOAB on : 2020-06-09 16:38:57
License:

Loading...
Export citation

Choose an application

Abstract

With daily signals, Nature is communicating us that its unconscious wicked exploitation is no more sustainable. Our socio-economic system focuses on production increasing without considering the consequences. We are intoxicating ourselves on a daily bases just to allow the system to perpetuate itself. The time to switch into more natural solutions is come and the scientific community is ready to offer more natural product with comparable performance then the market products we are used to deal with. This book collects a broad set of scientific examples in which research groups from all over the world, aim to replace fossil fuel-based solutions with biomass derived materials. In here, some of the most innovative developments in the field of bio-materials are reported considering topics which goes from biomass valorization to the synthesis of high preforming bio-based materials.

Keywords

thermoplastic starch --- corn starch --- chitosan --- crosslinked microparticles --- lignin-containing cellulose nanofibrils --- poly(lactic acid) and composite films --- lignin content --- compatibility --- adsorption --- phenanthrene --- pyrene --- benzoyl cellulose --- stearoyl cellulose --- silkworm cocoons --- dense structure --- porosity --- robust fiber network --- mechanical properties --- photodegradation --- liquid natural rubber --- UV light --- TiO2 anatase --- latex state --- wood modification --- alkali lignin --- water resistance --- dimensional stability --- heat treatment --- polymeric composites --- antifouling --- metal binding --- iron chelation --- polydopamine coating --- free-radical polymerization --- galactoglucomannan --- lignin --- lignin-carbohydrate complex --- ultrafiltration --- precipitation --- hydrogel --- recycling --- thermal degradation --- mechanical degradation --- polylactic acid --- Bioflex --- Solanyl --- PHBV --- poly(lactic acid) --- pulp fibers --- biocomposite --- emulsion-solvent evaporation method --- films --- mechanical properties --- PHA --- mixed microbial cultures --- bioplastics --- feast-famine --- cost --- Peptone --- Microbial nutrient --- Anti-bacterial silver nanoparticle --- Escherichia coli --- Staphylococcus aureus --- tannin --- hemicellulose --- waste biomass --- HSQC-NMR --- pyrolysis mechanism --- hydrotropic treatment --- metal chloride --- delignification --- enzymatic saccharification --- lignocellulosic nanofibrils --- microencapsulated phase change material (MPCM) --- polylactic acid (PLA) --- toughening --- endothermic effect --- kenaf fiber --- hybrid composites --- bio-based --- film --- mechanical properties --- polysaccharides --- resource recovery --- solution casting --- orange waste --- nanocelluloses --- cellulose nanofibers --- cellulose nanocrystals --- bacterial cellulose --- cement --- fiber-cement --- Hatscheck process --- bio-inspired interfaces --- mechanical properties --- thermal stability --- sensitivity --- electrospinning --- tissue engineering --- paper-based scaffolds --- osteoblast proliferation --- polycaprolactone --- biopolymers --- nanoclays --- nanobiocomposites --- extrusion-compounding --- polyhydroxyalkanoates --- thermal properties --- mechanical properties --- differential scanning calorimetry --- nuclear magnetic resonance --- X-ray diffraction --- transparent wood --- chemical composition --- H2O2 bleaching treatment --- physicochemical properties --- cellulose --- electrical resistance --- copper coating --- electroless deposition --- humidity sensor --- strain sensor --- lyocell fiber --- asphalt rubber --- bio-asphalt --- mixing sequence --- workability --- storage stability --- tung oil --- unsaturated polyester resins --- thermosetting polymers --- structure–property relationship --- structural plastics --- ONP fibers --- silanization --- composites --- mechanical properties --- Artemisia vulgaris --- microcellulose fiber --- nanocellulose fibers --- natural fibers --- Bio-based foams --- wastewater treatments --- cationic dyes --- anionic surfactants --- pollutant adsorbents --- tannin polymer --- tannin-furanic foam --- biopolymers --- nanoclays --- bio-nanocomposites --- extrusion-compounding --- polyhydroxyalkanoates --- thermal properties --- microstructure --- volatiles --- autoxidation --- thermal gravimetric analysis --- scanning electron microscope --- headspace solid phase microextraction --- alginate sponge --- two-step lyophilization --- methylene blue --- adsorption capacity --- biomass resources --- hybrid nonisocyanate polyurethane --- solvent- and catalyst-free --- dimer acid --- melt condensation --- bacterial cellulose --- surface modification --- TEMPO oxidation --- one-pot synthesis --- immobilized TEMPO --- physical property --- skincare --- cellulose --- graphene oxide --- ionic liquid --- membrane --- transport properties --- heavy metals --- porous structure --- SAXS --- WAXS --- cellulose --- wood --- lignocellulose --- ionic liquid --- imidazolium --- fractionation --- dissolution --- GC-MS --- kaempferol --- knotwood --- larixol --- taxifolin --- vibrational spectroscopy --- n/a

Listing 1 - 4 of 4
Sort by
Narrow your search

Publisher

MDPI - Multidisciplinary Digital Publishing Institute (4)


License

CC by-nc-nd (4)


Language

eng (2)

english (2)


Year
From To Submit

2020 (2)

2019 (1)

2017 (1)