Search results: Found 13

Listing 1 - 10 of 13 << page
of 2
>>
Sort by
Nanoscale investigation of potential distribution in operating Cu(In,Ga)Se2 thin-film solar cells

Author:
ISBN: 9783866449787 Year: Pages: VII, 170 p. DOI: 10.5445/KSP/1000032483 Language: ENGLISH
Publisher: KIT Scientific Publishing
Subject: Technology (General)
Added to DOAB on : 2019-07-30 20:02:00
License:

Loading...
Export citation

Choose an application

Abstract

The distribution of the electrostatic potential in and between the materials in Cu(In,Ga)Se2 thin-film solar cells has a major impact on their superior performance. This thesis reported on the nanoscale imaging of the electrostatic potential on untreated cross sections of operating Cu(In,Ga)Se2 solar cells using Kelvin probe force microscopy.

Plasma Processes for Renewable Energy Technologies

Author:
ISBN: 9783039219728 9783039219735 Year: Pages: 118 DOI: 10.3390/books978-3-03921-973-5 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: General and Civil Engineering --- Technology (General)
Added to DOAB on : 2020-01-30 16:39:46
License:

Loading...
Export citation

Choose an application

Abstract

The use of renewable energy is an effective solution for the prevention of global warming. On the other hand, environmental plasmas are one of powerful means to solve global environmental problems on nitrogen oxides, (NOx), sulfur oxides (SOx), particulate matter (PM), volatile organic compounds (VOC), and carbon dioxides (CO2) in the atmosphere. By combining both technologies, we can develop an extremely effective environmental improvement technology. Based on this background, a Special Issue of the journal Energies on plasma processes for renewable energy technologies is planned. On the issue, we focus on environment plasma technologies that can effectively utilize renewable electric energy sources, such as photovoltaic power generation, biofuel power generation, wind turbine power generation, etc. However, any latest research results on plasma environmental improvement processes are welcome for submission. We are looking, among others, for papers on the following technical subjects in which either plasma can use renewable energy sources or can be used for renewable energy technologies: Plasma decomposition technology of harmful gases, such as the plasma denitrification method; Plasma removal technology of harmful particles, such as electrostatic precipitation; Plasma decomposition technology of harmful substances in liquid, such as gas–liquid interfacial plasma; Plasma-enhanced flow induction and heat transfer enhancement technologies, such as ionic wind device and plasma actuator; Plasma-enhanced combustion and fuel reforming; Other environment plasma technologies.

Intelligent Electronic Devices

Authors: --- ---
ISBN: 9783039289738 / 9783039289745 Year: Pages: 220 DOI: 10.3390/books978-3-03928-974-5 Language: eng
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General) --- General and Civil Engineering
Added to DOAB on : 2020-06-09 16:38:57
License:

Loading...
Export citation

Choose an application

Abstract

In a modern technological society, electronic engineering and design innovations are both academic and practical engineering fields that involve systematic technological materialization through scientific principles and engineering designs. Engineers and designers must work together with a variety of other professionals in their quest to find systems solutions to complex problems. Rapid advances in science and technology have broadened the horizons of engineering while simultaneously creating a multitude of challenging problems in every aspect of modern life. Current research is interdisciplinary in nature, reflecting a combination of concepts and methods that often span several areas of mechanics, mathematics, electrical engineering, control engineering, and other scientific disciplines. In addition, the 2nd IEEE International Conference on Knowledge Innovation and Invention 2019 (IEEE ICKII 2019) was held in Seoul, South Korea, on 12–15 July, 2019. This book, “Intelligent Electronic Devices”, includes 13 excellent papers form 260 papers presented in this conference about intelligent electronic devices. The main goals of this book were to encourage scientists to publish their experimental and theoretical results in as much detail as possible and to provide new scientific knowledge relevant to the topics of electronics.

Keywords

test pattern generation --- built-in self-test --- broadcast circuit --- low cost --- negative differential resistance --- current-voltage characteristics --- multiple simple current mirror --- threshold voltage --- oscillator --- voltage-controlled oscillator --- ZnO-based nanowires --- hydrothermal method --- Eu3+ and In3+ ions --- photoluminescence properties --- mosquitoes --- Aedes aegypti --- Aedes albopictus --- secondary freeform lens device (SFLD) --- stearic --- dual-input converter --- high voltage gain --- leakage energy recycling --- galvanic isolation --- voltage clamping --- actuator --- lower limb exoskeleton --- wearable robot --- cone-beam computerized tomography (CBCT) --- as low as diagnostically acceptable (ALADA) --- selective anatomy analytic iteration reconstruction (SA2IR) --- low-dosed --- sparse projections --- diagnostic ability --- drift region --- electrostatic discharge (ESD) --- holding voltage (Vh) --- lateral diffusion MOS (LDMOS) --- transmission-line pulse system (TLP system) --- laser pointer --- electromagnetic lock --- sound recognition module --- regions with convolutional neural network (R-CNN) --- adaptive network-based fuzzy inference system (ANFIS) --- 6-DOF robot arm --- high-definition multimedia interface --- PCB layout --- electromagnetic interference --- radiation resistance --- multi-robots --- path programming --- tabu search --- action quality assessment --- human activity analysis --- skeletal feature representation --- electrical circuits and devices --- computer science and engineering --- communications and information processing --- electrostatic discharge (ESD) --- latchup (LU) --- n-channel lateral diffused MOSFET (nLDMOS) --- non-uniform conduction --- secondary breakdown current (It2) --- transmission-line pulse system (TLP system) --- brushless DC motor --- sensorless motor drive --- speed control --- 180-degree conduction

Thioredoxin and Glutaredoxin Systems

Authors: ---
ISBN: 9783038978367 9783038978374 Year: Pages: 280 DOI: 10.3390/books978-3-03897-837-4 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Science (General) --- Biology
Added to DOAB on : 2019-06-26 08:44:06
License:

Loading...
Export citation

Choose an application

Abstract

This Special Issue features recent data concerning thioredoxins and glutaredoxins from various biological systems, including bacteria, mammals, and plants. Four of the sixteen articles are review papers that deal with the regulation of development of the effect of hydrogen peroxide and the interactions between oxidants and reductants, the description of methionine sulfoxide reductases, detoxification enzymes that require thioredoxin or glutaredoxin, and the response of plants to cold stress, respectively. This is followed by eleven research articles that focus on a reductant of thioredoxin in bacteria, a thioredoxin reductase, and a variety of plant and bacterial thioredoxins, including the m, f, o, and h isoforms and their targets. Various parameters are studied, including genetic, structural, and physiological properties of these systems. The redox regulation of monodehydroascorbate reductase, aminolevulinic acid dehydratase, and cytosolic isocitrate dehydrogenase could have very important consequences in plant metabolism. Also, the properties of the mitochondrial o-type thioredoxins and their unexpected capacity to bind iron–sulfur center (ISC) structures open new developments concerning the redox mitochondrial function and possibly ISC assembly in mitochondria. The final paper discusses interesting biotechnological applications of thioredoxin for breadmaking.

Keywords

methionine --- methionine sulfoxide --- methionine sulfoxide reductase --- physiological function --- protein --- plant --- repair --- redox homeostasis --- signaling --- stress --- mitochondria --- thioredoxin --- iron–sulfur cluster --- redox regulation --- ALAD --- tetrapyrrole biosynthesis --- redox control --- thioredoxins --- posttranslational modification --- chlorophyll --- redox regulation --- thioredoxin --- ferredoxin-thioredoxin reductase --- chloroplast --- H2O2 --- redox signalling --- development --- regeneration --- adult stem cells --- metazoan --- cyanobacteria --- thioredoxin --- photosynthesis --- redox active site --- thioredoxin --- disulfide --- flavin --- NADPH --- X-ray crystallography --- SAXS --- methanoarchaea --- chilling stress --- cold temperature --- posttranslational modification --- regulation --- ROS --- thiol redox network --- thioredoxin --- thioredoxin --- Calvin-Benson cycle --- photosynthesis --- carbon fixation --- chloroplast --- macromolecular crystallography --- protein-protein recognition --- electrostatic surface --- Chlamydomonas reinhardtii --- thioredoxin --- glutaredoxin --- legume plant --- symbiosis --- redox homeostasis --- stress --- thioredoxin --- monodehydroascorbate reductase --- water stress --- protein oxidation --- antioxidants --- ascorbate --- glutathione --- wheat --- thioredoxin --- thioredoxin reductase --- baking --- redox --- dough rheology --- protein oxidation --- methionine oxidation --- methionine sulfoxide reductases --- oxidized protein repair --- ageing --- Chlamydomonas reinhardtii --- cysteine alkylation --- cysteine reactivity --- MALDI-TOF mass spectrometry --- thioredoxin --- X-ray crystallography --- Isocitrate dehydrogenase --- glutathionylation --- nitrosylation --- glutaredoxin --- Arabidopsis thaliana --- thioredoxins --- plastidial --- specificity --- function --- proteomic --- photosynthesis --- Calvin cycle --- n/a

Optical MEMS

Authors: ---
ISBN: 9783039213030 9783039213047 Year: Pages: 172 DOI: 10.3390/books978-3-03921-304-7 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General) --- General and Civil Engineering
Added to DOAB on : 2019-12-09 11:49:15
License:

Loading...
Export citation

Choose an application

Abstract

Optical microelectromechanical systems (MEMS), microoptoelectromechanical systems (MOEMS), or optical microsystems are devices or systems that interact with light through actuation or sensing at a micro- or millimeter scale. Optical MEMS have had enormous commercial success in projectors, displays, and fiberoptic communications. The best-known example is Texas Instruments’ digital micromirror devices (DMDs). The development of optical MEMS was impeded seriously by the Telecom Bubble in 2000. Fortunately, DMDs grew their market size even in that economy downturn. Meanwhile, in the last one and half decade, the optical MEMS market has been slowly but steadily recovering. During this time, the major technological change was the shift of thin-film polysilicon microstructures to single-crystal–silicon microsructures. Especially in the last few years, cloud data centers are demanding large-port optical cross connects (OXCs) and autonomous driving looks for miniature LiDAR, and virtual reality/augmented reality (VR/AR) demands tiny optical scanners. This is a new wave of opportunities for optical MEMS. Furthermore, several research institutes around the world have been developing MOEMS devices for extreme applications (very fine tailoring of light beam in terms of phase, intensity, or wavelength) and/or extreme environments (vacuum, cryogenic temperatures) for many years. Accordingly, this Special Issue seeks to showcase research papers, short communications, and review articles that focus on (1) novel design, fabrication, control, and modeling of optical MEMS devices based on all kinds of actuation/sensing mechanisms; and (2) new developments of applying optical MEMS devices of any kind in consumer electronics, optical communications, industry, biology, medicine, agriculture, physics, astronomy, space, or defense.

Keywords

scanning micromirror --- electromagnetic actuator --- angle sensor --- flame retardant 4 (FR4) --- variable optical attenuator (VOA) --- wavelength dependent loss (WDL) --- polarization dependent loss (PDL) --- micro-electro-mechanical systems (MEMS) --- tunable fiber laser --- echelle grating --- DMD chip --- MEMS scanning micromirror --- fringe projection --- laser stripe scanning --- quality map --- large reflection variations --- 3D measurement --- laser stripe width --- vibration noise --- MLSSP --- MEMS scanning mirror --- wavefront sensing --- digital micromirror device --- ocular aberrations --- dual-mode liquid-crystal (LC) device --- infrared Fabry–Perot (FP) filtering --- LC micro-lenses controlled electrically --- spectrometer --- infrared --- digital micromirror device (DMD) --- signal-to-noise ratio (SNR) --- stray light --- programmable spectral filter --- digital micromirror device --- optical switch --- microscanner --- input shaping --- open-loop control --- quasistatic actuation --- residual oscillation --- usable scan range --- higher-order modes --- resonant MEMS scanner --- electrostatic --- parametric resonance --- NIR fluorescence --- intraoperative microscope --- 2D Lissajous --- fluorescence confocal --- metasurface --- metalens --- field of view (FOV) --- achromatic --- Huygens’ metalens --- bio-optical imaging --- optical coherence tomography --- confocal --- two-photon --- spectrometer --- MEMS mirror --- electrothermal bimorph --- Cu/W bimorph --- electrothermal actuation --- reliability --- n/a

MEMS Accelerometers

Authors: --- ---
ISBN: 9783038974147 9783038974154 Year: Pages: 252 DOI: 10.3390/books978-3-03897-415-4 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General) --- General and Civil Engineering
Added to DOAB on : 2019-06-26 08:44:06
License:

Loading...
Export citation

Choose an application

Abstract

Micro-electro-mechanical system (MEMS) devices are widely used for inertia, pressure, and ultrasound sensing applications. Research on integrated MEMS technology has undergone extensive development driven by the requirements of a compact footprint, low cost, and increased functionality. Accelerometers are among the most widely used sensors implemented in MEMS technology. MEMS accelerometers are showing a growing presence in almost all industries ranging from automotive to medical. A traditional MEMS accelerometer employs a proof mass suspended to springs, which displaces in response to an external acceleration. A single proof mass can be used for one- or multi-axis sensing. A variety of transduction mechanisms have been used to detect the displacement. They include capacitive, piezoelectric, thermal, tunneling, and optical mechanisms. Capacitive accelerometers are widely used due to their DC measurement interface, thermal stability, reliability, and low cost. However, they are sensitive to electromagnetic field interferences and have poor performance for high-end applications (e.g., precise attitude control for the satellite). Over the past three decades, steady progress has been made in the area of optical accelerometers for high-performance and high-sensitivity applications but several challenges are still to be tackled by researchers and engineers to fully realize opto-mechanical accelerometers, such as chip-scale integration, scaling, low bandwidth, etc.

Keywords

low-temperature co-fired ceramic (LTCC) --- capacitive accelerometer --- wireless --- process optimization --- performance characterization --- MEMS accelerometer --- mismatch of parasitic capacitance --- electrostatic stiffness --- high acceleration sensor --- piezoresistive effect --- MEMS --- micro machining --- turbulent kinetic energy dissipation rate --- probe --- microelectromechanical systems (MEMS) piezoresistive sensor chip --- Taguchi method --- marine environmental monitoring --- accelerometer --- frequency --- acceleration --- heat convection --- motion analysis --- auto-encoder --- dance classification --- deep learning --- self-coaching --- wavelet packet --- classification of horse gaits --- MEMS sensors --- gait analysis --- rehabilitation assessment --- body sensor network --- MEMS accelerometer --- electromechanical delta-sigma --- built-in self-test --- in situ self-testing --- digital resonator --- accelerometer --- activity monitoring --- regularity of activity --- sleep time duration detection --- indoor positioning --- WiFi-RSSI radio map --- MEMS-IMU accelerometer --- zero-velocity update --- step detection --- stride length estimation --- field emission --- hybrid integrated --- vacuum microelectronic --- cathode tips array --- interface ASIC --- micro-electro-mechanical systems (MEMS) --- delaying mechanism --- safety and arming system --- accelerometer --- multi-axis sensing --- capacitive transduction --- inertial sensors --- three-axis accelerometer --- micromachining --- miniaturization --- stereo visual-inertial odometry --- fault tolerant --- hostile environment --- MEMS-IMU --- mode splitting --- Kerr noise --- angular-rate sensing --- whispering-gallery-mode --- optical microresonator --- three-axis acceleration sensor --- MEMS technology --- sensitivity --- L-shaped beam --- n/a

Miniaturized Transistors

Authors: ---
ISBN: 9783039210107 9783039210114 Year: Pages: 202 DOI: 10.3390/books978-3-03921-011-4 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General) --- General and Civil Engineering
Added to DOAB on : 2019-06-26 08:44:06
License:

Loading...
Export citation

Choose an application

Abstract

What is the future of CMOS? Sustaining increased transistor densities along the path of Moore's Law has become increasingly challenging with limited power budgets, interconnect bandwidths, and fabrication capabilities. In the last decade alone, transistors have undergone significant design makeovers; from planar transistors of ten years ago, technological advancements have accelerated to today's FinFETs, which hardly resemble their bulky ancestors. FinFETs could potentially take us to the 5-nm node, but what comes after it? From gate-all-around devices to single electron transistors and two-dimensional semiconductors, a torrent of research is being carried out in order to design the next transistor generation, engineer the optimal materials, improve the fabrication technology, and properly model future devices. We invite insight from investigators and scientists in the field to showcase their work in this Special Issue with research papers, short communications, and review articles that focus on trends in micro- and nanotechnology from fundamental research to applications.

Keywords

flux calculation --- etching simulation --- process simulation --- topography simulation --- CMOS --- field-effect transistor --- ferroelectrics --- MOS devices --- negative-capacitance --- piezoelectrics --- power consumption --- thin-film transistors (TFTs) --- compact model --- surface potential --- technology computer-aided design (TCAD) --- metal oxide semiconductor field effect transistor (MOSFET) --- topography simulation --- metal gate stack --- level set --- high-k --- fin field effect transistor (FinFET) --- line edge roughness --- metal gate granularity --- nanowire --- non-equilibrium Green’s function --- random discrete dopants --- SiGe --- variability --- band-to-band tunneling (BTBT) --- electrostatic discharge (ESD) --- tunnel field-effect transistor (TFET) --- Silicon-Germanium source/drain (SiGe S/D) --- technology computer aided design (TCAD) --- bulk NMOS devices --- radiation hardened by design (RHBD) --- total ionizing dose (TID) --- Sentaurus TCAD --- layout --- two-dimensional material --- field effect transistor --- indium selenide --- phonon scattering --- mobility --- high-? dielectric --- low-frequency noise --- silicon-on-insulator --- MOSFET --- inversion channel --- buried channel --- subthreshold bias range --- low voltage --- low energy --- theoretical model --- process simulation --- device simulation --- compact models --- process variations --- systematic variations --- statistical variations --- FinFETs --- nanowires --- nanosheets --- semi-floating gate --- synaptic transistor --- neuromorphic system --- spike-timing-dependent plasticity (STDP) --- highly miniaturized transistor structure --- low power consumption --- drain engineered --- tunnel field effect transistor (TFET) --- polarization --- ambipolar --- subthreshold --- ON-state --- doping incorporation --- plasma-aided molecular beam epitaxy (MBE) --- segregation --- silicon nanowire --- n/a

Sustainable Energy Systems: From Primary to End-Use

Authors: --- ---
ISBN: 9783039210961 9783039210978 Year: Pages: 314 DOI: 10.3390/books978-3-03921-097-8 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Science (General) --- Physics (General)
Added to DOAB on : 2019-12-09 11:49:15
License:

Loading...
Export citation

Choose an application

Abstract

This book focuses on sustainable energy systems. While several innovative and alternative concepts are presented, the topics of energy policy, life cycle assessment, thermal energy, and renewable energy also play a major role. Models on various temporal and geographical scales are developed to understand the conditions of technical as well as organizational change. New methods of modeling, which can fulfil technical and physical boundary conditions and nevertheless consider economic environmental and social aspects, are also developed.

Keywords

Active Disturbance Rejection Control --- Probabilistic Robustness --- Monte Carlo --- secondary air regulation --- areal grey relational analysis --- fuzzy rough set --- game theory --- AHP --- uncertainty analysis --- coal-fired power unit --- renewable energy --- biomass --- torrefaction --- grindability --- rotary reactor --- generation system scheduling --- integrated model --- basic plan for long-term electricity supply and demand --- forecasting model for electricity demand --- biomass --- Pinus pinaster --- fuel --- heating value --- fuelwood value index --- energy density --- ash recovery --- peach --- Energy Life-Cycle Assessment --- post-harvest --- fuzzy logic control --- artificial neural networks control --- tidal stream generator --- swell effect disturbance --- doubly fed induction generator --- maximum power point tracking --- capacity investment --- market power --- wind resources --- dynamic planning --- stochastic approach --- levelized cost of energy --- photovoltaic with energy storage system --- HOMER simulation --- LCOE comparison --- sensitivity analysis --- transient impact --- renewable energy source penetration --- power system stability --- robust optimization --- renewable energy --- flexibility --- deficit --- uncertainty --- flexible resource --- energy storage systems --- active power harmonics filter --- electrostatic devices --- hysteresis switching --- op-amp --- power electronics --- power supply reliability --- electricity --- manufacturing industry --- choice experiment --- willingness to pay --- nexus concept --- energy modelling --- resource efficiency --- renewable energy --- low-carbon economy --- forecasting --- multilayer perception --- photovoltaic --- sustainable energy --- pseudo-Huber loss --- energy from biomass --- textile industrial sector --- alternative energy --- SWOT analysis --- energy costs --- Internet of Things --- thermodynamic cycle concepts --- sustainability --- modified cycle concepts --- efficiency --- energy systems --- renewable energies --- wind power plants --- hollow rollers --- large bearings

MEMS Technology for Biomedical Imaging Applications

Authors: ---
ISBN: 9783039216048 9783039216055 Year: Pages: 218 DOI: 10.3390/books978-3-03921-605-5 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General) --- General and Civil Engineering
Added to DOAB on : 2019-12-09 11:49:16
License:

Loading...
Export citation

Choose an application

Abstract

Biomedical imaging is the key technique and process to create informative images of the human body or other organic structures for clinical purposes or medical science. Micro-electro-mechanical systems (MEMS) technology has demonstrated enormous potential in biomedical imaging applications due to its outstanding advantages of, for instance, miniaturization, high speed, higher resolution, and convenience of batch fabrication. There are many advancements and breakthroughs developing in the academic community, and there are a few challenges raised accordingly upon the designs, structures, fabrication, integration, and applications of MEMS for all kinds of biomedical imaging. This Special Issue aims to collate and showcase research papers, short commutations, perspectives, and insightful review articles from esteemed colleagues that demonstrate: (1) original works on the topic of MEMS components or devices based on various kinds of mechanisms for biomedical imaging; and (2) new developments and potentials of applying MEMS technology of any kind in biomedical imaging. The objective of this special session is to provide insightful information regarding the technological advancements for the researchers in the community.

Keywords

tilted microcoil --- electromagnetically-driven --- surface micromachining --- polyimide capillary --- MEMS --- ego-motion estimation --- indoor navigation --- monocular camera --- scale ambiguity --- wearable sensors --- photoacoustic --- microelectromechanical systems (MEMS) --- miniaturized microscope --- lead-free piezoelectric materials --- high frequency ultrasonic transducer --- needle-type --- high spatial resolution --- ultrahigh frequency ultrasonic transducer --- Si lens --- tight focus --- finite element simulation --- low noise amplifier (LNA) --- noise figure --- smart hydrogels --- bio-sensors --- chemo-sensor --- electrochemical sensors --- transduction techniques --- near-field microwave --- microwave resonator --- microwave remote sensing --- potentiometric sensor --- gold nanoparticles --- metal oxide field-effect transistor --- chemo-FET --- bio-FET --- photoacoustic imaging --- microelectromechanical systems (MEMS) --- MEMS scanning mirror --- micromachined US transducer --- microring resonator --- acoustic delay line --- MEMS mirror --- Lissajous scanning --- pseudo-resonant --- sensing --- imaging --- display --- MEMS actuators --- microendoscopy --- confocal --- two-photon --- wide-filed imaging --- photoacoustic --- fluorescence --- scanner --- capacitive micromachined ultrasonic transducer (CMUT) --- acoustics --- micromachining --- capacitive --- transducer --- modelling --- fabrication --- 3D Printing --- piezoelectric array --- ultrasonic transducer --- ultrasonic imaging --- micro-optics --- bioimaging --- microtechnology --- microelectromechanical systems (MEMS) --- in vitro --- in vivo --- cantilever waveguide --- electrostatic actuator --- non-resonating scanner --- optical scanner --- push-pull actuator --- rib waveguide --- n/a

MEMS/NEMS Sensors: Fabrication and Application

Authors: ---
ISBN: 9783039216345 9783039216352 Year: Pages: 242 DOI: 10.3390/books978-3-03921-635-2 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General) --- General and Civil Engineering
Added to DOAB on : 2019-12-09 16:10:12
License:

Loading...
Export citation

Choose an application

Abstract

Due to the ever-expanding applications of micro/nano-electromechanical systems (NEMS/MEMS) as sensors and actuators, interest in their development has rapidly expanded over the past decade. Encompassing various excitation and readout schemes, the MEMS/NEMS devices transduce physical parameter changes, such as temperature, mass or stress, caused by changes in desired measurands, to electrical signals that can be further processed. Some common examples of NEMS/MEMS sensors include pressure sensors, accelerometers, magnetic field sensors, microphones, radiation sensors, and particulate matter sensors. Despite a long history of development, fabrication of novel MEMS/NEMS devices still poses unique challenges due to their requirement for a suspended geometry; and many new fabrication techniques have been proposed to overcome these challenges. However, further development of these techniques is still necessary, as newer materials such as compound semiconductors, and 2-dimensional materials are finding their way in various MEMS/NEMS applications, with more complex structures and potentially smaller dimensions.

Keywords

thermoelectric power sensor --- wideband --- GaAs MMIC --- MEMS --- floating slug --- back cavity --- microwave measurement --- MEMS --- high temperature pressure sensors --- AlGaN/GaN circular HFETs --- GaN diaphragm --- adaptive control --- backstepping approach --- tracking performance --- microgyroscope --- resonant frequency --- resistance parameter --- micro fluidic --- oil detection --- MEMS --- microactuator --- magnetic --- micro-NIR spectrometer --- scanning grating mirror --- deflection position detector --- dual-mass MEMS gyroscope --- frequency tuning --- frequency split --- quadrature modulation signal --- frequency mismatch --- suspended micro hotplate --- single-layer SiO2 --- temperature uniformity --- power consumption --- infrared image --- MEMS (micro-electro-mechanical system) --- inertial switch --- acceleration switch --- threshold accuracy --- squeeze-film damping --- photonic crystal cavity --- photonic crystal nanobeam cavity --- optical sensor --- refractive index sensor --- nanoparticle sensor --- optomechanical sensor --- temperature sensor --- Accelerometer readout --- low noise --- low zero-g offset --- microfluidic --- femtosecond laser --- rapid fabrication --- glass welding --- bonding strength --- accelerometer design --- spring design --- analytical model --- gas sensor --- micropellistor --- microdroplet --- pulse inertia force --- methane --- tetramethylammonium hydroxide (TMAH) --- wet etching --- silicon --- 3D simulation --- level-set method --- single crystal silicon --- anisotropy --- vibrating ring gyroscope --- frequency split --- accelerometer --- tunnel magnetoresistive effect --- electrostatic force feedback --- n/a

Listing 1 - 10 of 13 << page
of 2
>>
Sort by
Narrow your search