Search results: Found 5

Listing 1 - 5 of 5
Sort by
Power Transformer Diagnostics, Monitoring and Design Features

Author:
ISBN: 9783038974413 9783038974420 Year: Pages: 254 DOI: 10.3390/books978-3-03897-442-0 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Electrical and Nuclear Engineering
Added to DOAB on : 2019-01-09 11:54:22
License:

Loading...
Export citation

Choose an application

Abstract

Power transformers are key components in electric power distribution and transmission systems, and it is essential that they function properly for many years. With increasing age, there are potential risks of extremely high monetary losses due to unexpected failures and outages. A simple solution would be to replace all aging and risky transformers at once with new ones. Such an approach is obviously not a fiscally realistic solution. The main objectives are to extend their service life and optimize their performance through increased availability. For these reasons, in the past decades transformer life management has gained an ever-increasing interest. The greatest challenges are related to the need for methods to assess their condition and life expectancy along with the improvement of transformers’ efficiency by noble designs and/or the application of new materials. This book covers some theoretical and practical developments with special emphasis on R&D trends in transformer diagnostics and monitoring. Graduate-level students and academics as well as scientists and engineers involved in power equipment design, diagnostics, and monitoring will benefit from this book.

Permanent Magnet Synchronous Machines

Author:
ISBN: 9783039213504 9783039213511 Year: Pages: 282 DOI: 10.3390/books978-3-03921-351-1 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General) --- General and Civil Engineering
Added to DOAB on : 2019-12-09 11:49:15
License:

Loading...
Export citation

Choose an application

Abstract

Interest in permanent magnet synchronous machines (PMSMs) is continuously increasing worldwide, especially with the increased use of renewable energy and the electrification of transports. This book contains the successful submissions of fifteen papers to a Special Issue of Energies on the subject area of “Permanent Magnet Synchronous Machines”. The focus is on permanent magnet synchronous machines and the electrical systems they are connected to. The presented work represents a wide range of areas. Studies of control systems, both for permanent magnet synchronous machines and for brushless DC motors, are presented and experimentally verified. Design studies of generators for wind power, wave power and hydro power are presented. Finite element method simulations and analytical design methods are used. The presented studies represent several of the different research fields on permanent magnet machines and electric drives.

Keywords

PMSM (permanent magnet synchronous motor) --- DB-DTFC (deadbeat-direct torque and flux control) --- torque control --- stability --- permanent-magnet machine --- brushless machine --- Vernier machine --- flux switching machine --- multiphase machine --- outer rotor --- electric vehicle --- interior permanent magnet synchronous machines --- magnetic reluctance network --- brushless dc motor --- phase-advanced method --- winding inductance --- sub-fractional slot-concentrated winding --- field weakening --- periodic timer interrupt --- Brushless DC motors --- current ripples --- current spikes --- modeling --- back electromotive force --- R-C filter --- cogging torque --- permanent magnet synchronous generator --- small wind turbines --- finite element method --- renewable energy --- energy conversion --- finite element analysis --- pulse width modulation --- permanent magnet synchronous generator --- wind generator --- MPC --- PMSM --- vector control --- speed tracking --- brushless DC (BLDC) motor --- sensorless motor --- commutation error compensation --- free-wheeling period --- permanent magnet synchronous motor (PMSM) --- sliding mode observer (SMO) --- parameter perturbation --- predictive current control (PCC) --- digital simulation --- motor drives --- interior permanent-magnet machines --- finite-element analysis --- modeling --- automotive applications --- electric vehicle (EV) --- hybrid electric vehicle (HEV) --- mathematical model --- saturation --- coils --- design tools --- energy efficiency --- linear generator --- power control --- stator --- wave power --- permanent magnet synchronous generator --- electrical machine design --- permanent magnet material --- bulk electric system --- condition monitoring --- electrical signature analysis --- fault diagnosis --- predictive maintenance --- synchronous generator --- permanent magnet synchronous machine (PMSM) --- flying start --- sensorless control --- permanent magnet synchronous generator --- permanent magnet synchronous motor --- electric propulsion systems --- renewable energy --- energy conversion

Wind Turbine Aerodynamics

Author:
ISBN: 9783039215249 9783039215256 Year: Pages: 410 DOI: 10.3390/books978-3-03921-525-6 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: Technology (General) --- General and Civil Engineering
Added to DOAB on : 2019-12-09 11:49:15
License:

Loading...
Export citation

Choose an application

Abstract

Wind turbine aerodynamics is one of the central subjects of wind turbine technology. To reduce the levelized cost of energy (LCOE), the size of a single wind turbine has been increased to 12 MW at present, with further increases expected in the near future. Big wind turbines and their associated wind farms have many advantages but also challenges. The typical effects are mainly related to the increase in Reynolds number and blade flexibility. This Special Issue is a collection of 21 important research works addressing the aerodynamic challenges appearing in such developments. The 21 research papers cover a wide range of problems related to wind turbine aerodynamics, which includes atmospheric turbulent flow modeling, wind turbine flow modeling, wind turbine design, wind turbine control, wind farm flow modeling in complex terrain, wind turbine noise modeling, vertical axis wind turbine, and offshore wind energy. Readers from all over the globe are expected to greatly benefit from this Special Issue collection regarding their own work and the goal of enabling the technological development of new environmentally friendly and cost-effective wind energy systems in order to reach the target of 100% energy use from renewable sources, worldwide, by 2050

Keywords

H-type floating VAWT --- truss Spar floating foundation --- coupling of aerodynamics and hydrodynamics --- computational fluid dynamics --- wind farm --- complex terrain --- SCADA --- met mast measurements --- wind turbine --- simplified free vortex wake --- vortex ring --- aerodynamics --- axial steady condition --- variable pitch --- H-type VAWT --- straight blade --- DMST model --- NACA0012 --- wind energy --- power coefficient --- tip speed ratio --- wind turbine blade optimization --- computational fluid dynamic --- actuator disc --- wake effect --- Non-dominated Sorting Genetic Algorithm (NSGA-II) --- wind turbine airfoil --- dynamic stall --- boundary layer separation --- aerodynamic characteristics --- rotor blade optimization --- blade parametrization --- computational fluid dynamics --- OpenFOAM --- gradient-based --- adjoint approach --- wind turbine optimization --- low wind speed areas --- cost of energy --- particle swarm optimization --- dynamic stall --- pitch oscillation --- oscillating freestream --- rotational augmentation --- wind turbine --- turbulence --- super-statistics --- piezo-electric flow sensor --- ABL stability --- laminar-turbulent transition --- wind speed extrapolation --- atmospheric stability --- wind shear --- wind resource assessment --- wind turbine --- stall --- NREL Phase VI --- S809 airfoil --- MEXICO --- RANS --- wind turbine wakes --- turbulence --- actuator disk --- LES --- wind tunnel --- OpenFOAM --- wind turbine --- wind turbine design --- optimization --- blade length --- economic analysis --- typhoon --- wind turbine --- meso/microscale --- aerodynamic force --- mechanical performance --- thermography --- wind turbine blades --- defects --- image processing --- condition monitoring --- wind farm --- layout optimization --- design --- random search --- complex terrain --- airfoil design --- aerodynamic --- wind tunnel experiment --- VAWTs (Vertical axis wind turbines) --- computational fluid dynamics --- floating offshore wind turbine --- dynamic fluid body interaction --- semi-submersible platform --- OC5 DeepCWind --- wind turbine --- aerodynamics --- turbulent inflow --- Computational Fluid Dynamics --- blade element momentum theory --- actuator line method --- Fatigue Loads --- wind turbine noise source --- wind turbine noise propagation --- wind turbine wake --- n/a

Applications of Power Electronics

Authors: --- ---
ISBN: 9783038979746 9783038979753 Year: Volume: 1 Pages: 476 DOI: 10.3390/books978-3-03897-975-3 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: General and Civil Engineering --- Technology (General)
Added to DOAB on : 2019-06-26 08:44:06
License:

Loading...
Export citation

Choose an application

Abstract

Power electronics technology is still an emerging technology, and it has found its way into many applications, from renewable energy generation (i.e., wind power and solar power) to electrical vehicles (EVs), biomedical devices, and small appliances, such as laptop chargers. In the near future, electrical energy will be provided and handled by power electronics and consumed through power electronics; this not only will intensify the role of power electronics technology in power conversion processes, but also implies that power systems are undergoing a paradigm shift, from centralized distribution to distributed generation. Today, more than 1000 GW of renewable energy generation sources (photovoltaic (PV) and wind) have been installed, all of which are handled by power electronics technology. The main aim of this book is to highlight and address recent breakthroughs in the range of emerging applications in power electronics and in harmonic and electromagnetic interference (EMI) issues at device and system levels as discussed in ?robust and reliable power electronics technologies, including fault prognosis and diagnosis technique stability of grid-connected converters and ?smart control of power electronics in devices, microgrids, and at system levels.

Keywords

energy storage --- lithium-ion battery --- battery management system BMS --- battery modeling --- state of charge SoC --- grid-connected inverter --- power electronics --- multi-objective optimization --- switching frequency --- total demand distortion --- switching losses --- EMI filter --- power converter --- power density --- optimal design --- electrical drives --- axial flux machines --- magnetic equivalent circuit --- torque ripple --- back EMF --- permanent-magnet machines --- five-phase permanent magnet synchronous machine --- five-leg voltage source inverter --- multiphase space vector modulation --- sliding mode control --- extended Kalman filter --- voltage source inverters (VSI) --- voltage control --- current control --- digital control --- predictive controllers --- advanced controllers --- stability --- response time --- lithium-ion batteries --- electric vehicles --- battery management system --- electric power --- dynamic PV model --- grid-connected VSI --- HF-link MPPT converter --- nanocrystalline core --- SiC PV Supply --- DC–DC converters --- multi-level control --- renewable energy resources control --- electrical engineering communications --- microgrid control --- distributed control --- power system operation and control --- variable speed pumped storage system --- droop control --- vector control --- phasor model technique --- nine switch converter --- synchronous generator --- digital signal controller --- static compensator, distribution generation --- hybrid converter --- multi-level converter (MLC) --- series active filter --- power factor correction (PFC) --- field-programmable gate array --- particle swarm optimization --- selective harmonic elimination method --- voltage source converter --- plug-in hybrid electric vehicles --- power management system --- renewable energy sources --- fuzzy --- smart micro-grid --- five-phase machine --- fault-tolerant control --- induction motor --- one phase open circuit fault (1-Ph) --- adjacent two-phase open circuit fault (A2-Ph) --- volt-per-hertz control (scalar control) --- current-fed inverter --- LCL-S topology --- semi-active bridge --- soft switching --- voltage boost --- wireless power transfer --- DC–DC conversion --- zero-voltage switching (ZVS) --- transient control --- DC–DC conversion --- bidirectional converter --- power factor correction --- line frequency instability --- one cycle control --- non-linear phenomena --- bifurcation --- boost converter --- converter --- ice melting --- modular multilevel converter (MMC) --- optimization design --- transmission line --- static var generator (SVG) --- hardware-in-the-loop --- floating-point --- fixed-point --- real-time emulation --- field programmable gate array --- slim DC-link drive --- VPI active damping control --- total harmonic distortion --- cogging torque --- real-time simulation --- power converters --- nonlinear control --- embedded systems --- high level programing --- SHIL --- DHIL --- 4T analog MOS control --- high frequency switching power supply --- water purification --- modulation index --- electromagnetic interference --- chaotic PWM --- DC-DC buck converter --- CMOS chaotic circuit --- triangular ramp generator --- spread-spectrum technique --- system in package --- electric vehicle --- wireless power transfer --- inductive coupling --- coupling factor --- phase-shift control --- series-series compensation --- PSpice --- fixed-frequency double integral sliding-mode (FFDISM) --- class-D amplifier --- Q-factor --- GaN cascode --- direct torque control (DTC) --- composite active vectors modulation (CVM) --- permanent magnet synchronous motor (PMSM) --- effect factors --- double layer capacitor (DLC) models --- energy storage modelling --- simulation models --- current control loops --- dual three-phase (DTP) permanent magnet synchronous motors (PMSMs) --- space vector pulse width modulation (SVPWM) --- vector control --- voltage source inverter --- active rectifiers --- single-switch --- analog phase control --- digital phase control --- wireless power transfer --- three-level boost converter (TLBC) --- DC-link cascade H-bridge (DCLCHB) inverter --- conducting angle determination (CAD) techniques --- total harmonic distortion (THD) --- three-phase bridgeless rectifier --- fault diagnosis --- fault tolerant control --- hardware in loop --- compensation topology --- electromagnetic field (EMF) --- electromagnetic field interference (EMI) --- misalignment --- resonator structure --- wireless power transfer (WPT) --- WPT standards --- EMI filter --- electromagnetic compatibility --- AC–DC power converters --- electromagnetic interference filter --- matrix converters --- current source --- power density --- battery energy storage systems --- battery chargers --- active receivers --- frequency locking --- reference phase calibration --- synchronization --- wireless power transfer --- lithium-ion batteries --- SOC estimator --- parameter identification --- particle swarm optimization --- improved extended Kalman filter --- battery management system --- PMSG --- DC-link voltage control --- variable control gain --- disturbance observer --- lithium-ion power battery pack --- composite equalizer --- active equalization --- passive equalization --- control strategy and algorithm --- n/a --- common-mode inductor --- high-frequency modeling --- electromagnetic interference --- filter --- fault diagnosis --- condition monitoring --- induction machines --- support vector machines --- expert systems --- neural networks --- DC-AC power converters --- frequency-domain analysis --- impedance-based model --- Nyquist stability analysis --- small signal stability analysis --- harmonic linearization --- line start --- permanent magnet --- synchronous motor --- efficiency motor --- rotor design --- harmonics --- hybrid power filter --- active power filter --- power quality --- total harmonic distortion --- equivalent inductance --- leakage inductance --- switching frequency modelling --- induction motor --- current switching ripple --- multilevel inverter --- cascaded topology --- voltage doubling --- switched capacitor --- nearest level modulation (NLM) --- total harmonic distortion (THD) --- dead-time compensation --- power converters --- harmonics --- n/a

Applications of Power Electronics

Authors: --- ---
ISBN: 9783039210206 9783039210213 Year: Volume: 2 Pages: 500 DOI: 10.3390/books978-3-03921-021-3 Language: English
Publisher: MDPI - Multidisciplinary Digital Publishing Institute
Subject: General and Civil Engineering --- Technology (General)
Added to DOAB on : 2019-06-26 08:44:06
License:

Loading...
Export citation

Choose an application

Abstract

Power electronics technology is still an emerging technology, and it has found its way into many applications, from renewable energy generation (i.e., wind power and solar power) to electrical vehicles (EVs), biomedical devices, and small appliances, such as laptop chargers. In the near future, electrical energy will be provided and handled by power electronics and consumed through power electronics; this not only will intensify the role of power electronics technology in power conversion processes, but also implies that power systems are undergoing a paradigm shift, from centralized distribution to distributed generation. Today, more than 1000 GW of renewable energy generation sources (photovoltaic (PV) and wind) have been installed, all of which are handled by power electronics technology. The main aim of this book is to highlight and address recent breakthroughs in the range of emerging applications in power electronics and in harmonic and electromagnetic interference (EMI) issues at device and system levels as discussed in ?robust and reliable power electronics technologies, including fault prognosis and diagnosis technique stability of grid-connected converters and ?smart control of power electronics in devices, microgrids, and at system levels.

Keywords

energy storage --- lithium-ion battery --- battery management system BMS --- battery modeling --- state of charge SoC --- grid-connected inverter --- power electronics --- multi-objective optimization --- switching frequency --- total demand distortion --- switching losses --- EMI filter --- power converter --- power density --- optimal design --- electrical drives --- axial flux machines --- magnetic equivalent circuit --- torque ripple --- back EMF --- permanent-magnet machines --- five-phase permanent magnet synchronous machine --- five-leg voltage source inverter --- multiphase space vector modulation --- sliding mode control --- extended Kalman filter --- voltage source inverters (VSI) --- voltage control --- current control --- digital control --- predictive controllers --- advanced controllers --- stability --- response time --- lithium-ion batteries --- electric vehicles --- battery management system --- electric power --- dynamic PV model --- grid-connected VSI --- HF-link MPPT converter --- nanocrystalline core --- SiC PV Supply --- DC–DC converters --- multi-level control --- renewable energy resources control --- electrical engineering communications --- microgrid control --- distributed control --- power system operation and control --- variable speed pumped storage system --- droop control --- vector control --- phasor model technique --- nine switch converter --- synchronous generator --- digital signal controller --- static compensator, distribution generation --- hybrid converter --- multi-level converter (MLC) --- series active filter --- power factor correction (PFC) --- field-programmable gate array --- particle swarm optimization --- selective harmonic elimination method --- voltage source converter --- plug-in hybrid electric vehicles --- power management system --- renewable energy sources --- fuzzy --- smart micro-grid --- five-phase machine --- fault-tolerant control --- induction motor --- one phase open circuit fault (1-Ph) --- adjacent two-phase open circuit fault (A2-Ph) --- volt-per-hertz control (scalar control) --- current-fed inverter --- LCL-S topology --- semi-active bridge --- soft switching --- voltage boost --- wireless power transfer --- DC–DC conversion --- zero-voltage switching (ZVS) --- transient control --- DC–DC conversion --- bidirectional converter --- power factor correction --- line frequency instability --- one cycle control --- non-linear phenomena --- bifurcation --- boost converter --- converter --- ice melting --- modular multilevel converter (MMC) --- optimization design --- transmission line --- static var generator (SVG) --- hardware-in-the-loop --- floating-point --- fixed-point --- real-time emulation --- field programmable gate array --- slim DC-link drive --- VPI active damping control --- total harmonic distortion --- cogging torque --- real-time simulation --- power converters --- nonlinear control --- embedded systems --- high level programing --- SHIL --- DHIL --- 4T analog MOS control --- high frequency switching power supply --- water purification --- modulation index --- electromagnetic interference --- chaotic PWM --- DC-DC buck converter --- CMOS chaotic circuit --- triangular ramp generator --- spread-spectrum technique --- system in package --- electric vehicle --- wireless power transfer --- inductive coupling --- coupling factor --- phase-shift control --- series-series compensation --- PSpice --- fixed-frequency double integral sliding-mode (FFDISM) --- class-D amplifier --- Q-factor --- GaN cascode --- direct torque control (DTC) --- composite active vectors modulation (CVM) --- permanent magnet synchronous motor (PMSM) --- effect factors --- double layer capacitor (DLC) models --- energy storage modelling --- simulation models --- current control loops --- dual three-phase (DTP) permanent magnet synchronous motors (PMSMs) --- space vector pulse width modulation (SVPWM) --- vector control --- voltage source inverter --- active rectifiers --- single-switch --- analog phase control --- digital phase control --- wireless power transfer --- three-level boost converter (TLBC) --- DC-link cascade H-bridge (DCLCHB) inverter --- conducting angle determination (CAD) techniques --- total harmonic distortion (THD) --- three-phase bridgeless rectifier --- fault diagnosis --- fault tolerant control --- hardware in loop --- compensation topology --- electromagnetic field (EMF) --- electromagnetic field interference (EMI) --- misalignment --- resonator structure --- wireless power transfer (WPT) --- WPT standards --- EMI filter --- electromagnetic compatibility --- AC–DC power converters --- electromagnetic interference filter --- matrix converters --- current source --- power density --- battery energy storage systems --- battery chargers --- active receivers --- frequency locking --- reference phase calibration --- synchronization --- wireless power transfer --- lithium-ion batteries --- SOC estimator --- parameter identification --- particle swarm optimization --- improved extended Kalman filter --- battery management system --- PMSG --- DC-link voltage control --- variable control gain --- disturbance observer --- lithium-ion power battery pack --- composite equalizer --- active equalization --- passive equalization --- control strategy and algorithm --- n/a --- common-mode inductor --- high-frequency modeling --- electromagnetic interference --- filter --- fault diagnosis --- condition monitoring --- induction machines --- support vector machines --- expert systems --- neural networks --- DC-AC power converters --- frequency-domain analysis --- impedance-based model --- Nyquist stability analysis --- small signal stability analysis --- harmonic linearization --- line start --- permanent magnet --- synchronous motor --- efficiency motor --- rotor design --- harmonics --- hybrid power filter --- active power filter --- power quality --- total harmonic distortion --- equivalent inductance --- leakage inductance --- switching frequency modelling --- induction motor --- current switching ripple --- multilevel inverter --- cascaded topology --- voltage doubling --- switched capacitor --- nearest level modulation (NLM) --- total harmonic distortion (THD) --- dead-time compensation --- power converters --- harmonics --- n/a

Listing 1 - 5 of 5
Sort by
Narrow your search

Publisher

MDPI - Multidisciplinary Digital Publishing Institute (5)


License

CC by-nc-nd (5)


Language

english (5)


Year
From To Submit

2019 (5)